On the problem of heat treatment of high-chromium steelsCHEILYAKH, A. P.Metal science and heat treatment. 2000, Vol 42, Num 9-10, pp 395-398, issn 0026-0673Article

Some effects of minor alloying additions on the development and breakdown of protective oxide scalesWRIGHT, I. G; SRINIVASAN, V; VEDULA, K. M et al.Materials at high temperatures. 1993, Vol 11, Num 1-4, pp 159-166, issn 0960-3409Conference Paper

Fundamental aspects of oxidation, sulfidation, chloridation and carburization in the gasifier environmentGRABKE, H. J.Materials at high temperatures. 1993, Vol 11, Num 1-4, pp 23-29, issn 0960-3409Conference Paper

In-plant corrosion test results of candidate materials in coal gasification plantsFUKUDA, Y; KIDA, E.Materials at high temperatures. 1993, Vol 11, Num 1-4, pp 94-100, issn 0960-3409Conference Paper

Creep simulation of 9-12% Cr steels using the composite model with thermodynamically calculated inputBARKAR, Thomas; AGREN, John.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2005, Vol 395, Num 1-2, pp 110-115, issn 0921-5093, 6 p.Article

Corrosion-resistant steel fiber produced by the melt-extraction method and its use in refractoriesVAN I-KHO; LYU VEN-NEN.Metal science and heat treatment. 1992, Vol 34, Num 9-10, pp 578-581, issn 0026-0673Article

Effect of heat treatment on the structure and mechanical properties of 0.08%C―17.0%Cr―0.8%Ti steel after internal nitridingNIKULIN, S. A; ROGACHEV, S. O; KHATKEVICH, V. M et al.Journal of alloys and compounds. 2013, Vol 564, pp 114-116, issn 0925-8388, 3 p.Article

A thermodynamic model of the Z-phase Cr(V, Nb)NDANIELSEN, Hilmar Kjartansson; HALD, John.Calphad. 2007, Vol 31, Num 4, pp 505-514, issn 0364-5916, 10 p.Article

Microstructure development in ridging affected ferritic stainless steelsSZTWIERTNIA, Krzysztof; POSPIECH, J. A. N; ROSTEK, Tomasz et al.Archives of metallurgy. 2002, Vol 47, Num 2, pp 197-204, issn 0860-7052Article

Characterization of the carbides in the steel X20CrMoV12.1 used in thermal power plantsDANIJELA ANICA SKOBIR; GODEC, Matjaz; JENKO, Monika et al.Surface and interface analysis. 2008, Vol 40, Num 3-4, pp 513-517, issn 0142-2421, 5 p.Conference Paper

Experience of the Kostroma district power station in replacing the low-pressure flow paths of the intermediate- and low-pressure cylinders in the K-300-240-1 turbines manufactured by lmz with modernized onesKUZNETSOV, V. Ya; TARAN, O. E; KURAZHEV, A. P et al.Thermal engineering. 2000, Vol 47, Num 11, pp 1023-1024, issn 0040-6015Article

TEM observation of grain boundary precipitates and Cr-depleted zone in 18 mass%Cr steelsISHIKAWA, S; FUJISAWA, M; SHIMOMURA, J.-I et al.Nippon Kinzoku Gakkaishi (1952). 1999, Vol 63, Num 5, pp 625-633, issn 0021-4876Article

Deformation mechanisms in a high-chromium ferritic steel. III: Deformation mechanisms and microstructure evolutionBELYAKOV, A. N; KAIBYSHEV, R. O.Physics of metals and metallography. 1995, Vol 79, Num 2, pp 224-228, issn 0031-918XArticle

Some aspects of intermetallic phase precipitation in a 12% Cr-steelJANOVEC, J; RICHARZ, B; GRABKE, H. J et al.Scripta metallurgica et materialia. 1995, Vol 33, Num 2, pp 295-300, issn 0956-716XArticle

Compositional characterisation and thermodynamic modelling of nitride precipitates in a 12 % Cr steelALBU, Mihaela; MENDEZ MARTIN, Francisca; KOTHLEITNER, Gerald et al.International journal of materials research. 2008, Vol 99, Num 4, pp 422-427, issn 1862-5282, 6 p.Article

Hundert Jahre Wälzlagerstahl 100Cr6: der Klassiker unter den Edelbaustählen = Hundred years steel rolling bearing 100Cr6: the classics under the super construction steelsHENGERER, F.Konstruktion (1981). 2003, pp 30-33, issn 0720-5953, 4 p., NS1Article

Engineering approach to modelling the multiaxial creep and damage behaviour of compact tension geometry specimens of a 12 Cr steel at 550° CGAUDIG, Wolfgang.Steel research. 2000, Vol 71, Num 6-7, pp 264-270, issn 0177-4832Article

A study on Z-phase nucleation in martensitic chromium steelsGOLPAYEGANI, Ardeshir; ANDREN, Hans-Olof; DANIELSEN, Hilmar et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2008, Vol 489, Num 1-2, pp 310-318, issn 0921-5093, 9 p.Article

Structure of the Kh21A13 steel and phase transformations upon incomplete quenching of high-nitrogen Fe-Cr steelsNEMIROVSKII, Yu. R; KHADYEV, M. S; FILIPPOV, M. A et al.Physics of metals and metallography. 2002, Vol 93, Num 5, pp 484-488, issn 0031-918XArticle

Promising high-chromium steels for application in fuel element claddings of fast neutron reactorMEDVEDEVA, E. A; BIBILASHVILI, Yu. K; KAZYONNOV, Yu. I et al.Fizika i himiâ obrabotki materialov. 2001, Num 6, pp 26-31, issn 0015-3214Article

On the mechanisms of mesolevel fragmentation in a plastically deformed surface-hardened chromium steelPANIN, V. E; SLOSMAN, A. I; KOLESOVA, N. A et al.Physics of metals and metallography. 1997, Vol 84, Num 2, pp 198-201, issn 0031-918XArticle

Plasma-based nitrogen implantation of chrome-plated steelXU, G. C; OKUI, M; HIBINO, Y et al.Surface & coatings technology. 2001, Vol 136, Num 1-3, pp 231-235, issn 0257-8972Conference Paper

Effect of heat treatment on the structural transformations and properties of high-nitrogen chromium steelsBLINOV, V. M; ELISTRATOV, A. V; KOLESNIKOV, A. G et al.Metal science and heat treatment. 2000, Vol 42, Num 5-6, pp 221-225, issn 0026-0673Article

Magnetic properties of quenched and tempered high-chromium steels and their potential for nondestructive evaluationBIDA, G. V; SAZHINA, E. YU; TSAR'KOVA, T. P et al.Russian journal of nondestructive testing. 1996, Vol 32, Num 8, pp 604-610, issn 1061-8309Article

Microstructure of titanium nitride thin films controlled by ion bombardment in a magnetron-sputtering deviceCERNY, R; KUZEL, R. JR; VALVODA, V et al.Surface & coatings technology. 1994, Vol 64, Num 2, pp 111-117, issn 0257-8972Article